BS EN 60079-19:2007
$198.66
Explosive atmospheres – Equipment repair, overhaul and reclamation
| Published By | Publication Date | Number of Pages |
| BSI | 2007 | 60 |
This part of IEC 60079 gives instructions, principally of a technical nature, on the repair, overhaul, reclamation and modification of a certified equipment designed for use in explosive atmospheres; it is not applicable to maintenance, other than when repair and overhaul cannot be disassociated from maintenance, neither does it give advice on cable entry systems which may require renewal when the equipment is re-installed.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 9 | 1 Scope 2 Normative references |
| 10 | 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. |
| 12 | 4 General 4.1 General principles 4.2 Statutory requirements 4.2.1 Repair facility |
| 13 | 4.2.2 User 4.3 Instructions for the user 4.3.1 Certificates and documents 4.3.2 Records and work instructions 4.3.3 Re-installation of repaired equipment 4.3.4 Repair facilities 4.4 Instructions for the repair facility 4.4.1 Repair and overhaul 4.4.1.1 General |
| 14 | 4.4.1.2 Certification and standards 4.4.1.3 Competency 4.4.1.4 Testing 4.4.1.5 Documentation 4.4.1.5.1 General |
| 15 | 4.4.1.5.2 Job report to the user 4.4.1.5.3 Repair facility records |
| 16 | 4.4.1.6 Spare parts 4.4.1.6.1 General 4.4.1.6.2 Sealed parts |
| 17 | 4.4.1.7 Identification of repaired equipment 4.4.2 Reclamations 4.4.2.1 General 4.4.2.2 Exclusions 4.4.2.3 Requirements 4.4.2.3.1 General |
| 18 | 4.4.2.3.2 Responsibilities 4.4.2.4 Reclamation procedures 4.4.2.4.1 General |
| 19 | 4.4.2.4.2 Metal spraying 4.4.2.4.3 Electroplating 4.4.2.4.4 Sleeving 4.4.2.4.5 Brazing and welding |
| 20 | 4.4.2.4.6 Metal stitching 4.4.2.4.7 Machining of stator and rotor cores (rotating machines) 4.4.2.4.8 Threaded holes for fasteners 4.4.2.4.9 Re-machining 4.4.3 Modifications |
| 21 | 4.4.4 Temporary repairs 4.4.5 Removal of damaged windings 4.4.6 Inverters 5 Additional requirements for the repair and overhaul of equipment with type of protection “d” (flameproof) 5.1 Application 5.2 Repair and overhaul 5.2.1 Enclosures |
| 22 | 5.2.2 Cable and conduit entries 5.2.3 Terminations 5.2.4 Insulation 5.2.5 Internal connections |
| 23 | 5.2.6 Windings 5.2.6.1 General 5.2.6.2 Repair of rotating machine rotors 5.2.6.3 Testing after repair of windings 5.2.6.3.1 General |
| 24 | 5.2.6.3.2 Rotating machines 5.2.6.4 Temperature sensors If temperature sensors are included to monitor winding temperatures, it is recommended that they are embedded in the winding before varnishing and curing. 5.2.7 Auxiliary equipment 5.2.7.1 Flameproof brake units 5.2.7.2 Other auxiliary devices 5.2.8 Light-transmitting parts 5.2.9 Encapsulated parts 5.2.10 Batteries |
| 25 | 5.2.11 Lamps 5.2.12 Lampholders 5.2.13 Ballasts 5.3 Reclamation 5.3.1 Enclosures 5.3.1.1 General 5.3.1.2 Flameproof joints |
| 26 | 5.3.1.3 Threaded holes for fasteners 5.3.2 Sleeving 5.3.3 Shafts and housings 5.3.4 Sleeve bearings 5.3.5 Rotors and stators 5.4 Modifications 5.4.1 Enclosures |
| 27 | 5.4.2 Cable or conduit entries 5.4.3 Terminations 5.4.4 Windings 5.4.5 Auxiliary equipment 6 Additional requirements for the repair and overhaul of equipment with type of protection “i” (intrinsic safety) 6.1 Application |
| 28 | 6.2 Repair and overhaul 6.2.1 Enclosures 6.2.2 Cable entries 6.2.3 Terminations 6.2.4 Soldered connections 6.2.5 Fuses 6.2.6 Relays |
| 29 | 6.2.7 Shunt diode safety barriers 6.2.8 Printed circuit boards 6.2.9 Optocouplers 6.2.10 Electrical components 6.2.11 Batteries 6.2.12 Internal wiring 6.2.13 Transformers 6.2.14 Encapsulated components |
| 30 | 6.2.15 Non-electrical parts 6.2.16 Testing 6.3 Reclamation 6.4 Modifications 7 Additional requirements for the repair and overhaul of equipment with type of protection “p” (pressurized) 7.1 Application 7.2 Repair and overhaul 7.2.1 Enclosures |
| 31 | 7.2.2 Cable and conduit entries 7.2.3 Terminations 7.2.4 Insulation 7.2.5 Internal connections 7.2.6 Windings 7.2.6.1 General 7.2.6.2 Repair of rotating machine rotors 7.2.6.3 Testing after repair of windings 7.2.6.3.1 General |
| 32 | 7.2.6.3.2 Rotating machines 7.2.7 Light-transmitting parts 7.2.8 Encapsulated parts |
| 33 | 7.2.9 Batteries 7.2.10 Lamps 7.2.11 Lampholders 7.2.12 Ballasts 7.3 Reclamation 7.3.1 Enclosures 7.3.1.1 General 7.3.1.2 Joints 7.3.2 Shafts and housings 7.3.3 Sleeve bearings |
| 34 | 7.3.4 Rotors and stators 7.4 Modifications 7.4.1 Enclosures 7.4.2 Cable and conduit entries 7.4.3 Terminations 7.4.4 Windings 7.4.5 Auxiliary equipment |
| 35 | 8 Additional requirements for the repair and overhaul of equipment with type of protection “e” (increased safety) 8.1 Application 8.2 Repair and overhaul 8.2.1 Enclosures 8.2.2 Cable or conduit entries |
| 36 | 8.2.3 Terminations 8.2.4 Insulation 8.2.5 Internal connections 8.2.6 Windings 8.2.6.1 General |
| 37 | 8.2.6.2 Repair of rotating machine rotors 8.2.6.3 Testing after repair of windings 8.2.6.3.1 General 8.2.6.3.2 Rotating machines |
| 38 | 8.2.6.3.3 Temperature sensors 8.2.7 Light-transmitting parts 8.2.8 Encapsulated parts 8.2.9 Batteries 8.2.10 Lamps 8.2.11 Lampholders 8.2.12 Ballasts |
| 39 | 8.3 Reclamation 8.3.1 Enclosures 8.3.1.1 General 8.3.1.2 Joints 8.3.1.3 Shafts and housings 8.3.2 Sleeve bearings 8.3.3 Rotors and stators |
| 40 | 8.4 Modifications 8.4.1 Enclosures 8.4.2 Cable and conduit entries 8.4.3 Terminations 8.4.4 Windings 8.4.5 Auxiliary equipment 9 Additional requirements for the repair and overhaul of equipment with type of protection “n” (non-sparking) 9.1 Application 9.2 Repair and overhaul 9.2.1 Enclosures |
| 41 | 9.2.2 Cable and conduit entries 9.2.3 Terminations 9.2.4 Insulation 9.2.5 Internal connections |
| 42 | 9.2.6 Windings 9.2.6.1 General 9.2.6.2 Repair of rotating machine rotors 9.2.6.3 Testing after repair of windings 9.2.6.3.1 General |
| 43 | 9.2.6.3.2 Rotating machines 9.2.6.4 Temperature sensors 9.2.7 Light-transmitting parts 9.2.8 Encapsulated parts 9.2.9 Batteries 9.2.10 Lamps 9.2.11 Lamp holders 9.2.12 Ballasts |
| 44 | 9.2.13 Enclosed break devices 9.3 Reclamation 9.3.1 Enclosures 9.3.2 Joints 9.3.3 Rotating machines 9.3.3.1 Shafts and housings 9.3.3.2 Sleeve bearings 9.3.3.3 Rotors and stators |
| 45 | 9.4 Modifications 9.4.1 Enclosures 9.4.2 Cable and conduit entries 9.4.3 Terminations 9.4.4 Windings 9.4.5 Auxiliary equipment 10 Additional requirements for the repair and overhaul of equipment covered by IEC 60079-26 11 Additional requirements for the repair and overhaul of equipment with type of protection ‘tD’ 11.1 Application |
| 46 | 11.2 Repair and overhaul 11.2.1 Enclosures 11.2.2 Cable and conduit entries 11.2.3 Insulation |
| 47 | 11.2.4 Internal connections 11.2.5 Windings 11.2.5.1 General 11.2.5.2 Testing after repair of windings 11.2.5.2.1 General |
| 48 | 11.2.5.2.2 Rotating machines 11.2.6 Temperature sensors 11.2.7 Light-transmitting parts 11.2.8 Lamps 11.3 Reclamation 11.3.1 Enclosures 11.3.2 Joints |
| 49 | 11.3.3 Rotating machines 11.3.3.1 Shafts and housings 11.3.3.2 Sleeve bearings 11.3.3.3 Rotors and stators 11.4 Modifications 11.4.1 Enclosures 11.4.2 Cable and conduit entries 11.4.3 Windings 11.4.4 Auxiliary equipment |
| 50 | 12 Additional requirements for the repair and overhaul of equipment with type of protection pressurization “pD” 12.1 Application 12.2 Repair and overhaul 12.3 Reclamation 12.4 Modifications |
