ASME BPVC III 3 2019

$377.00

ASME BPVC – III – 3 -2019 BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste

Published By	Publication Date	Number of Pages
ASME	2019	335

Guaranteed Safe Checkout

Category: ASME

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

This Division contains requirements for the design and construction of the containment systems for nuclear spent fuel or high-level radioactive material transport packaging. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.

PDF Catalog

PDF Pages	PDF Title
69	WA-4134.17-1 Lifetime Quality Assurance Records WA-4134.17-2 Nonpermanent Quality Assurance Records
73	WA-7100-1 Dimensional Standards
74	WA-7100-2 Standards and Specifications Referenced in Division 3
75	WA-8100-1 Authorizations and Certification Mark Issued by the Society for the Construction of Transportation and Storage Components and Parts
77	WA-8212-1 Form of Stamping
79	N-7 Nuclear Containments
81	N-8 For Class SC or TC Closure Welds
82	N-9 Shop Fabricated Parts
84	N-11 Certificate Holder’s Data Report for Internal Support Structures
95	WB-2331.2-1 Required LST‐RTNDT Values for Ferritic Steel Material for Containment Material WB-2331.2-2 Required Fracture Toughness Values for Ferritic Steel Material for Containments Having a Specified Yield Strength of 50 ksi (350 000 kPa) or Less at 100°F (38°C)
96	WB-2332(a)-1 Required Cv Values for Piping WB-2333-1 Required Cv Values for Bolting Material
99	WB-2432.1-1 Sampling of Welding Materials for Chemical Analysis
100	WB-2432.2-1 Chemical Analysis for Welding Material
101	WB-2433.1-1 Weld Metal Delta Ferrite Content
106	WB-2552.1-1 Axial Propagation of Sound in Tube Wall
115	WB-3133.4-1 Values of Spherical Radius Factor, K1
121	WB-3217-1 Classification of Stress Intensity in Containments for Some Typical Cases
123	WB-3221-1 Stress Categories and Limits of Stress Intensity for Design Loadings
124	WB-3222-1 Stress Categories and Limits of Stress Intensity for Normal Loadings
128	WB-3224.1-1 Stress Categories and Limits of Stress Intensity for Accident Loadings for Elastic Analysis
132	WB-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
133	WB-3252-1 Typical Butt Joints
136	WB-3261-1 Categories A and B Joints Between Sections of Unequal Thickness
140	WB-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
141	WB-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
142	WB-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation WB-4232-1 Maximum Allowable Offset in Final Welded Joints
143	WB-4233(a)-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
144	WB-4243-1 Acceptable Full Penetration Weld Details for Category C Joints
145	WB-4243-2 Typical Flat Heads With Hubs
146	WB-4244(a)-1 Nozzles Attached by Full Penetration Butt Welds
147	WB-4244(b)-1 Nozzles Attached by Full Penetration Corner Welds
148	WB-4244(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles
149	WB-4244(d)-1 Nozzles Attached by Partial Penetration Welds
155	WB-4427-1 Fillet Weld Details
156	WB-4433-1 Types of Attachment Welds
158	WB-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds WB-4622.4(c)-1 Alternative Holding Temperatures and Times
159	WB-4622.7(b)-1 Exemptions to Mandatory PWHT
162	WB-4622.9(c)(8)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
163	WB-4622.9(c)(8)-2 Temper Bead Reinforcement
164	WB-4622.9(f)-1 Qualification Test Plate
166	WB-4622.11(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
169	WB-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
186	WC-2311(a)-1 Exemptions From Impact Testing Under WC-2311(a)(7)
187	WC-2332.1-1 Required Cv Lateral Expansion Values for Containment Material Other Than Bolting
188	WC-2332.1-2 Required Cv Energy Values for Containment Material Other Than Bolting WC-2332.3-1 Required Cv Values for Bolting Material Tested in Accordance With WC-2332.3
192	WC-2432.1-1 Sampling of Welding Materials for Chemical Analysis
193	WC-2432.2-1 Welding Material Chemical Analysis
194	WC-2433.1-1 Weld Metal Delta Ferrite Content
205	WC-3133.4-1 Values of Spherical Radius Factor, K1
208	WC-3217-1 Stress Intensity k Factors for Design and Operating Load Combinations
211	WC-3224.6-1 Design Curves for Torispherical Heads and 2:1 Ellipsoidal Heads for Use With WC-3224.8 and WC-3224.6
213	WC-3225-1 Typical Flat Heads
214	WC-3225-2 Some Acceptable Types of Unstayed Flat Heads and Covers
215	WC-3225-3 Attachment of Flat Heads to Containment Shell
216	WC-3232.2-1 Chart for Determining the Value of F
217	WC-3251-1 Welded Joint Locations Typical of Categories A, B, C, and D
218	WC-3251-2 Typical Butt Joints
220	WC-3261-1 Categories A and B Joints Between Sections of Unequal Thickness WC-3262-1 Stress Reduction Factors and Examinations for Closure Welds
224	WC-4221.1-1 Maximum Difference in Cross‐Sectional Diameters
225	WC-4221.2(a)-1 Maximum Permissible Deviation e From a True Circular Form
226	WC-4221.2(a)-2 Maximum ARC Length for Determining Plus or Minus Deviation
227	WC-4232(a)-1 Maximum Allowable Offset in Final Welded Joints
228	WC-4233-1 Butt Weld Alignment and Mismatch Tolerances for Unequal I.D. and O.D. When Items Are Welded From One Side and Fairing Is Not Performed
229	WC-4265-1 Acceptable Full Penetration Weld Details for Category C Joints
230	WC-4265-2 Typical Partial Penetration Weld Detail for Category C Flat Head Closure Joints
231	WC-4265-3 Typical Flat Heads
232	WC-4266(a)-1 Nozzles Attached by Full Penetration Butt Welds
233	WC-4266(b)-1 Full Penetration Corner-Welded Attachments
234	WC-4266(c)-1 Deposited Weld Metal Used as Reinforcement of Openings for Nozzles WC-4266(d)-1 Fittings With Internal Threads
235	WC-4266(e)-1 Partial Penetration Weld Connections
240	WC-4427-1 Fillet and Socket Weld Details and Dimensions
241	WC-4433-1 Typical Types of Attachment Welds
242	WC-4433-2 Typical Attachments
244	WC-4524-1 Maximum Design Temperatures for Brazing Filler Metal, °F (°C)
245	WC-4622.1-1 Mandatory Requirements for Postweld Heat Treatment of Welds WC-4622.4(c)-1 Alternative Holding Temperatures and Times
246	WC-4622.7(b)-1 Exemptions to Mandatory PWHT
248	WC-4622.10(c)(7)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement
249	WC-4622.10(c)(7)-2 Temper Bead Reinforcement
250	WC-4622.10(f)-1 Qualification Test Plate
253	WC-4622.12(c)(6)-1 Temper Bead Weld Repair and Weld Temper Bead Reinforcement of Dissimilar Metal Welds or Buttering
256	WC-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters
268	WD-1131-1 Jurisdictional Boundary Between the Internal Support Structure and the Containment
273	WD-2331(a)-1 Required Cv Values for Internal Support Structure Material With 2 in. (50 mm) Maximum Thickness (Other Than Bolting)
274	WD-2333-1 Required Cv Values for Bolting Material
278	WD-2432.1-1 Sampling of Welding Materials for Chemical Analysis WD-2432.2-1 Welding Material Chemical Analysis
279	WD-2433.1-1 Weld Metal Delta Ferrite Content
291	WD-3217-1 Classification of Stress Intensities for Some Typical Cases
292	WD-3221-1 Stress Categories and Limits of Stress Intensities for Design Loadings
293	WD-3222-1 Stress Categories and Limits of Stress Intensities for Normal Loadings
297	WD-3224-1 Stress Categories and Limits of Stress Intensities for Off-Normal Loadings
300	WD-3229.2-1 Values of K for Various Boundary Conditions and a/b Ratios
302	WD-3234-1 Stress Limit Factors for Bolt Design by Analysis WD-3234.1(d)-1 Effective Slip Coefficient Versus Surface Condition
303	WD-3234.2-1 Maximum Sizes of Bolt Holes
304	WD-3234.3(a)-1 Minimum Edge Distances WD-3234.4-1 Increment C1 for Minimum Spacing Between Oversized and Slotted Holes
305	WD-3235.4-1 Classification of Loading Conditions WD-3235.5-1 Stress Categories
306	WD-3235.6-1 Allowable Stress Ranges
307	WD-3240-1 Permissible Welded Joints and Design Factors
317	WD-4427-1 Fillet Weld Details and Dimensions
318	WD-4441-1 Weld Inlay and Overlay Specifications
320	WD-4622.1-1 Mandatory Requirements for Postweld Heat Treatment (PWHT) of Welds
321	WD-4622.4(c)-1 Alternative Holding Temperatures and Times
322	WD-4622.7(b)-1 Exemptions to Mandatory PWHT
326	WD-5111-1 Thickness, IQI Designations, Essential Holes, and Wire Diameters

Additional information

Standard Title	ASME BPVC – III – 3 -2019 BPVC Section III, Rules for Construction of Nuclear Facility Components, Divison 3, Containment Systems & Transport Packagings for Spent Nuclear Fuel & High Level Radioactive Waste
Published Code	ASME
Publication Date	2019
Pages Count	335

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASME BPVC III 3 2019

PDF Catalog

Related products