🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME PTB 9 2014

ASME PTB 9 2014

$26.65

ASME PTB-9 ASME Pipeline Standards Compendium

Published By Publication Date Number of Pages
ASME 2014 113
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

The ASME Pipeline Standards Compendium is intended to aid users of the pipeline safety regulations promulgated by Parts 192, 193, and 195 of Title 49 of the U.S. Code of Federal Regulations. It describes each referenced ASME standard in plain language and also provides relevant technical excerpts. The ASME Pipeline Standards Compendium is not intended to be a complete standard covering all aspects of piping safety and should not be considered a substitution for the application of sound engineering judgment. Users are encouraged to refer to the most recent edition of the applicable ASME standard for additional information.

PDF Catalog

PDF Pages PDF Title
7 Foreword
8 1 INTRODUCTION
9 2 49 CFR 192 – TRANSPORATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS
2.1 Design of Pipeline Components
2.1.1 CFR Reference: 192.147 Flanges and Flange Accessories
2.1.1.1 CFR Language: 192.147(a)
2.1.1.2 ASME Standard Reference
2.1.1.3 CFR Language: 192.147(c)
2.1.1.4 ASME Standard Reference
2.1.2 CFR Reference: 192.153 Components Fabricated by Welding
2.1.2.1 CFR Language: 192.153(a)
2.1.2.2 ASME Standard Reference
2.1.2.3 CFR Language: 192.153(b)
10 2.1.2.4 ASME Standard Reference
2.1.2.5 CFR Language: 192.153(d)
2.1.2.6 ASME Standard Reference
2.1.3 CFR Reference: 192.165 Compressor Stations: Liquid Removal
2.1.3.1 CFR Language: 192.165(b)(3)
2.1.3.2 ASME Standard Reference
2.2 Welding of Steel in Pipelines
2.2.1 CFR Reference: 192.227 Qualification of Welders
2.2.1.1 CFR Language: 192.227(a)
2.2.1.2 ASME Standard Reference
11 2.3 Joining of Materials Other Than by Welding
2.3.1 CFR Reference: 192.279 Copper Pipe
2.3.1.1 CFR Language: 192.279
2.3.1.2 ASME Standard Language
2.4 Requirements for Corrosion Control
2.4.1 CFR Reference: 192.485 Remedial Measures: Transmission Lines
2.4.1.1 CFR Language: 192.485(c)
2.4.1.2 ASME Standard Reference
12 2.5 Operations
2.5.1 CFR Reference: 192.619 What is the Maximum Allowable Operating Pressure for Steel or Plastic Pipelines?
2.5.1.1 CFR Language: 192.619(a)(1)(i)
2.5.1.2 ASME Standard Language
2.5.1.2.1 Recommended Practice for Hydrostatic Testing of Pipelines in Place (B31.8 – Nonmandatory Appendix N)
2.5.1.2.1.1 Introduction (B31.8 – N-1)
2.5.1.2.1.2 Planning (B31.8 – N-2)
13 2.5.1.2.1.3 Filling (B31.8 – N-3)
2.5.1.2.1.4 Testing (B31.8 – N-4)
2.5.1.2.1.5 Determination of Pressure Required to Produce Yielding (B31.8 – N-5)
14 2.5.1.2.1.6 Leak Testing (B31.8 – N-6)
2.5.1.2.1.7 Records (B31.8 – N-7)
2.6 Gas Transmission Pipeline Integrity Management
2.6.1 CFR Reference: 192.903 What Definitions Apply to this Subpart?
2.6.1.1 CFR Language: 192.903(c)
15 2.6.1.2 ASME Standard Language
2.6.1.2.1 Consequences (B31.8S – 3)
2.6.1.2.1.1 General (B31.8S – 3.1)
2.6.1.2.1.2 Potential Impact Area (B31.8S – 3.2)
17 2.6.1.2.1.3 Consequence Factors to Consider (B31.8S – 3.3)
18 2.6.2 CFR Reference: 192.907 What Must an Operator Do to Implement this Subpart?
2.6.2.1 CFR Language: 192.907(b)
2.6.2.2 ASME Standard Language
2.6.2.2.1 Scope (B31.8S – 1.1)
2.6.3 CFR Reference: 192.911 What Are the Elements of an Integrity Management Program?
2.6.3.1 CFR Language: 192.911, 192.911(i), 192.911(k), 192.911(l), 192.911(m)
19 2.6.3.2 ASME Standard Language
2.6.3.2.1 Performance Plan (B31.8S – 9)
2.6.3.2.1.1 Introduction (B31.8S – 9.1)
2.6.3.2.1.2 Performance Measures Characteristics (B31.8S – 9.2)
20 2.6.3.2.1.3 Performance Measurement Methodology (B31.8S – 9.3)
2.6.3.2.1.4 Performance Measurement: Intrasystem (B31.8S – 9.4)
23 2.6.3.2.1.5 Performance Measurement: Industry Based (B31.8S – 9.5)
2.6.3.2.1.6 Performance Improvement (B31.8S – 9.6)
2.6.3.2.2 Communication Plan (B31.8S – 10)
2.6.3.2.2.1 General (B31.8S – 10.1)
24 2.6.3.2.2.2 External Communications (B31.8S – 10.2)
2.6.3.2.2.3 Internal Communications (B31.8S – 10.3)
25 2.6.3.2.3 Management of Change Plan (B31.8S – 11)
26 2.6.3.2.4 Quality Control Plan (B31.8S – 12)
2.6.3.2.4.1 General (B31.8S – 12.1)
2.6.3.2.4.2 Quality Management Control (B31.8S – 12.2)
27 2.6.4 CFR Reference: 192.913 When May an Operator Deviate its Program from Certain Requirements of this Subpart?
2.6.4.1 CFR Language: 192.913(a), 192.913(b)(1)
28 2.6.4.2 ASME Standard Language
2.6.5 CFR Reference: 192.917 How Does an Operator Identify Potential Threats to Pipeline Integrity and Use the Threat Identification in its Integrity Program?
2.6.5.1 CFR Language 192.917(a)
2.6.5.2 ASME Standard Language
2.6.5.2.1 Integrity Management Program Overview (B31.8S – 2)
2.6.5.2.1.1 General (B31.8S – 2.1)
31 2.6.5.2.1.2 Integrity Threat Classification (B31.8S – 2.2)
32 2.6.5.2.1.3 The Integrity Management Process (B31.8S – 2.3)
34 2.6.5.2.1.4 Integrity Management Program (B31.8S – 2.4)
35 2.6.5.2.2 Integrity Assessment (B31.8S – 6)
2.6.5.2.2.1 General (B31.8S – 6.1)
36 2.6.5.2.2.2 Pipeline In-Line Inspection (B31.8S – 6.2)
38 2.6.5.2.2.3 Pressure Testing (B31.8S – 6.3)
39 2.6.5.2.2.4 Direct Assessment (B31.8S – 6.4)
41 2.6.5.2.2.5 Other Integrity Assessment Methodologies (B31.8S – 6.5)
2.6.5.2.3 Integrity Management Plan (B31.8S – 8)
2.6.5.2.3.1 General (B31.8S – 8.1)
42 2.6.5.2.3.2 Updating the Plan (B31.8S – 8.2)
2.6.5.2.3.3 Plan Framework (B31.8S – 8.3)
45 2.6.5.3 CFR Language: 192.917(b)
2.6.5.4 ASME Standard Language
2.6.5.4.1 Gathering, Reviewing, and Integrating Data (B31.8S – 4)
2.6.5.4.1.1 General (B31.8S – 4.1)
46 2.6.5.4.1.2 Data Requirements (B31.8S – 4.2)
47 2.6.5.4.1.3 Data Sources (B31.8S – 4.3)
48 2.6.5.4.1.4 Data Collection, Review, and Analysis (B31.8S – 4.4)
2.6.5.4.1.5 Data Integration (B31.8S – 4.5)
49 2.6.5.4.2 Threat Process Charts and Prescriptive Integrity Management Plans (B31.8S Nonmandatory Appendix A)
2.6.5.4.2.1 External Corrosion Threat (B31.8S – A-1)
2.6.5.4.2.1.1. Scope (B31.8S – A-1.1)
2.6.5.4.2.1.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-1.2)
50 2.6.5.4.2.1.3. Criteria and Risk Assessment (B31.8S – A-1.3)
2.6.5.4.2.1.4. Integrity Assessment (B31.8S – A-1.4)
51 2.6.5.4.2.1.5. Responses and Mitigation (B31.8S – A-1.5)
52 2.6.5.4.2.1.6. Other Data (B31.8S – A-1.6)
2.6.5.4.2.1.7. Assessment Interval (B31.8S – A-1.7)
2.6.5.4.2.1.8. Performance Measures (B31.8S – A-1.8)
2.6.5.4.2.2 Internal Corrosion Threat (B31.8S – A-2)
2.6.5.4.2.2.1. Scope (B31.8S – A-2.1)
2.6.5.4.2.2.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-2.2)
54 2.6.5.4.2.2.3. Criteria and Risk Assessment (B31.8S – A-2.3)
2.6.5.4.2.2.4. Integrity Assessment (B31.8S – A-2.4)
2.6.5.4.2.2.5. Responses and Mitigation (B31.8S – A-2.5)
55 2.6.5.4.2.2.6. Other Data (B31.8S – A-2.6)
2.6.5.4.2.2.7. Assessment Interval (B31.8S – A-2.7)
2.6.5.4.2.2.8. Performance Metrics (B31.8S – A-2.8)
2.6.5.4.2.3 Stress Corrosion Cracking Threat (B31.8S – A-3)
2.6.5.4.2.3.1. Scope (B31.8S – A-3.1)
56 2.6.5.4.2.3.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-3.2)
2.6.5.4.2.3.3. Criteria and Threat Assessment (B31.8S – A-3.3)
2.6.5.4.2.3.4. Integrity Assessment (B31.8S – A-3.4)
58 2.6.5.4.2.3.5. Other Data (B31.8S – A-3.5)
59 2.6.5.4.2.3.6. Performance Measures (B31.8S – A-3.6)
2.6.5.4.2.4 Manufacturing Threat (Pipe Seam and Pipe) (B31.8S – A-4)
2.6.5.4.2.4.1. Scope (B31.8S – A-4.1)
2.6.5.4.2.4.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-4.2)
60 2.6.5.4.2.4.3. Criteria and Risk Assessment (B31.8S – A-4.3)
61 2.6.5.4.2.4.4. Integrity Assessment (B31.8S – A-4.4)
2.6.5.4.2.4.5. Responses and Mitigation (B31.8S – A-4.5)
2.6.5.4.2.4.6. Other Data (B31.8S – A-4.6)
2.6.5.4.2.4.7. Assessment Interval (B31.8S – A-4.7)
2.6.5.4.2.4.8. Performance Measures (B31.8S – A-4.8)
2.6.5.4.2.5 Construction Threat (Pipe Girth Weld, Fabrication Weld, Wrinkle Bend or Buckle, Stripped Threads/Broken Pipe/ Coupling) (B31.8S – A-5)
2.6.5.4.2.5.1. Scope (B31.8S – A-5.1)
62 2.6.5.4.2.5.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-5.2)
2.6.5.4.2.5.3. Criteria and Risk Assessment (B31.8S – A-5.3)
2.6.5.4.2.5.4. Integrity Assessment (B31.8S – A-5.4)
2.6.5.4.2.5.5. Responses and Mitigation (B31.8S – A-5.5)
63 2.6.5.4.2.5.6. Other Data (B31.8S – A-5.6)
2.6.5.4.2.5.7. Assessment Interval (B31.8S – A-5.7)
64 2.6.5.4.2.5.8. Performance Measures (B31.8S – A-5.8)
2.6.5.4.2.6 Equipment Threat (Gaskets and O-Rings, Control/Relief, Seal/Pump Packing) (B31.8S – A-6)
2.6.5.4.2.6.1. Scope (B31.8S – A-6.1)
2.6.5.4.2.6.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-6.2)
65 2.6.5.4.2.6.3. Criteria and Risk Assessment (B31.8S – A-6.3)
2.6.5.4.2.6.4. Integrity Assessment (B31.8S – A-6.4)
66 2.6.5.4.2.6.5. Responses and Mitigation (B31.8S – A-6.5)
2.6.5.4.2.6.6. Other Data (B31.8S – A-6.6)
2.6.5.4.2.6.7. Assessment Interval (B31.8S – A-6.7)
2.6.5.4.2.6.8. Performance Measures (B31.8S – A-6.8)
2.6.5.4.2.7 Third-Party Damage Threat [Third-Party Inflicted Damage (Immediate), Vandalism, Previously Damaged Pipe] (B31.8S – A-7)
2.6.5.4.2.7.1. Scope (B31.8S – A-7.1)
2.6.5.4.2.7.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-7.2)
67 2.6.5.4.2.7.3. Criteria and Risk Assessment (B31.8S – A-7.3)
2.6.5.4.2.7.4. Integrity Assessment (B31.8S – A-7.4)
68 2.6.5.4.2.7.5. Responses and Mitigation (B31.8S – A-7.5)
2.6.5.4.2.7.6. Other Data (B31.8S – A-7.6)
69 2.6.5.4.2.7.7. Assessment Interval (B31.8S – A-7.7)
2.6.5.4.2.7.8. Performance Measures (B31.8S – A-7.8)
2.6.5.4.2.8 Incorrect Operations Threat (B31.8S – A-8)
2.6.5.4.2.8.1. Scope (B31.8S – A-8.1)
2.6.5.4.2.8.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-8.2)
2.6.5.4.2.8.3. Criteria and Risk Assessment (B31.8S – A-8.3)
2.6.5.4.2.8.4. Integrity Assessment (B31.8S – A-8.4)
2.6.5.4.2.8.5. Responses and Mitigation (B31.8S – A-8.5)
70 2.6.5.4.2.8.6. Other Data (B31.8S – A-8.6)
2.6.5.4.2.8.7. Assessment Interval (B31.8S – A-8.7)
71 2.6.5.4.2.8.8. Performance Measures (B31.8S – A-8.8)
2.6.5.4.2.9 Weather-Related and Outside Force Threat (Earth Movement, Heavy Rains or Floods, Cold Weather, Lightning) (B31.8S – A-9)
2.6.5.4.2.9.1. Scope (B31.8S – A-9.1)
2.6.5.4.2.9.2. Gathering, Reviewing, and Integrating Data (B31.8S – A-9.2)
2.6.5.4.2.9.3. Criteria and Risk Assessment (B31.8S – A-9.3)
72 2.6.5.4.2.9.4. Integrity Assessment (B31.8S – A-9.4)
2.6.5.4.2.9.5. Responses and Mitigation (B31.8S – A-9.5)
2.6.5.4.2.9.6. Other Data (B31.8S – A-9.6)
2.6.5.4.2.9.7. Assessment Interval (B31.8S – A-9.7)
73 2.6.5.4.2.9.8. Performance Measures (B31.8S – A-9.8)
2.6.5.5 CFR Language: 192.917(c)
2.6.5.6 ASME Standard Language
74 2.6.5.6.1 Risk Assessment (B31.8S – 5)
2.6.5.6.1.1 Introduction (B31.8S – 5.1)
2.6.5.6.1.2 Definition (B31.8S – 5.2)
2.6.5.6.1.3 Risk Assessment Objectives (B31.8S – 5.3)
75 2.6.5.6.1.4 Developing a Risk Assessment Approach (B31.8S – 5.4)
2.6.5.6.1.5 Risk Assessment Approaches (B31.8S – 5.5)
76 2.6.5.6.1.6 Risk Analysis (B31.8S – 5.6)
78 2.6.5.6.1.7 Characteristics of an Effective Risk Assessment Approach (B31.8S – 5.7)
79 2.6.5.6.1.8 Risk Estimates Using Assessment Methods (B31.8S – 5.8)
2.6.5.6.1.9 Data Collection for Risk Assessment (B31.8S – 5.9)
80 2.6.5.6.1.10 Prioritization for Prescriptive-Based and Performance-Based Integrity Management Programs (B31.8S – 5.10)
81 2.6.5.6.1.11 Integrity Assessment and Mitigation (B31.8S – 5.11)
2.6.5.6.1.12 Validation (B31.8S – 5.12)
2.6.5.7 CFR Language: 192.917(e)(1)
82 2.6.5.8 ASME Standard Language
2.6.5.9 CFR Language: 192.917(e)(4)
2.6.5.10 ASME Standard Language
2.6.6 CFR Reference: 192.921 How is the Baseline Assessment to be Conducted?
2.6.6.1 CFR Language: 192.921(a)(1)
2.6.6.2 ASME Standard Language:
2.6.7 CFR Reference: 192.923 How is Direct Assessment Used and for What Threats?
2.6.7.1 CFR Language: 192.923(b)(1)
2.6.7.2 ASME Standard Language
83 2.6.7.3 CFR Language: 192.923(b)(2)
2.6.7.4 ASME Standard Language
2.6.7.4.1 Internal Corrosion Direct Assessment (B31.8S – B2)
2.6.7.5 CFR Language: 192.923(b)(3)
2.6.7.6 ASME Standard Language
2.6.8 CFR Reference: 192.925 What are the Requirements for Using External Corrosion Direct Assessment (ECDA)?
2.6.8.1 CFR Language: 192.925(b) Introductory text
2.6.8.2 ASME Standard Language
2.6.8.3 CFR Language: 192.925(b)(1)
84 2.6.8.4 ASME Standard Language
2.6.8.5 CFR Language: 192.925(b)(2)
2.6.8.6 ASME Standard Language
2.6.8.7 CFR Language: 192.925(b)(3)
85 2.6.8.8 ASME Standard Language
2.6.8.9 CFR Language: 192.925(b)(4)
2.6.8.10 ASME Standard Language
86 2.6.9 CFR Reference: 192.927 What are the Requirements for Using Internal Corrosion Direct Assessment (ICDA)?
2.6.9.1 CFR Language: 192.927(b)
2.6.9.2 ASME Standard Language
2.6.9.3 CFR Language: 192.927(c)(1)(i)
2.6.9.4 ASME Standard Language
2.6.10 CFR Reference: 192.929 What are the Requirements for Using Direct Assessment for Stress Corrosion Cracking (SCCDA)?
2.6.10.1 CFR Language: 192.929(b)(2)
2.6.10.2 ASME Standard Language
87 2.6.11 CFR Reference: 192.933 What Actions Must Be Taken to Address Integrity Issues? (192.933(a), (d)(1), (d)(1)(i))
2.6.11.1 CFR Language: 192.933(a)
2.6.11.2 ASME Standard Reference
2.6.11.3 CFR Language
2.6.11.4 ASME Standard Language
2.6.11.5 CFR Language: 192.933(d)(1)
2.6.11.6 ASME Standard Language
2.6.11.6.1 Responses to Integrity Assessments and Mitigation (Repair and Prevention) (B31.8S –7)
2.6.11.6.1.1 General (B31.8S –7.1)
88 2.6.11.6.1.2 Responses to Pipeline In-Line Inspections (B31.8S – 7.2)
92 2.6.11.6.1.3 Responses to Pressure Testing (B31.8S – 7.3)
93 2.6.11.6.1.4 Responses to Direct Assessment Inspections (B31.8S – 7.4)
2.6.11.6.1.5 Timing for Scheduled Responses (B31.8S – 7.5)
94 2.6.11.6.1.6 Repair Methods (B31.8S – 7.6)
2.6.11.6.1.7 Prevention Strategy/Methods (B31.8S – 7.7)
2.6.11.6.1.8 Prevention Options (B31.8S – 7.8)
2.6.11.7 CFR Language: 192.933(d)(1)(i)
95 2.6.11.8 ASME Standard Language
2.6.12 CFR Reference: 192.935 What Additional Preventive and Mitigative Measures Must an Operator Take?
2.6.12.1 CFR Language: 192.935(a)
2.6.12.2 ASME Standard Language
2.6.12.3 CFR Language: 192.935(b)(1)(iv)
96 2.6.12.4 ASME Standard Language
2.6.13 CFR Reference: 192.937 What is a Continual Process of Evaluation and Assessment to Maintain a Pipeline’s Integrity?
2.6.13.1 CFR Language: 192.937(c)(1)
2.6.13.2 ASME Standard Language
2.6.14 CFR Reference: 192.939 What are the Required Reassessment Intervals?
2.6.14.1 CFR Language: 192.939(a)(1)(i)
2.6.14.2 ASME Standard Language
97 2.6.14.3 CFR Language: 192.939(a)(1)(ii)
2.6.14.4 ASME Standard Language
2.6.14.5 CFR Language: 192.933(a)(3)
2.6.14.6 ASME Standard Language
2.6.15 CFR Reference: 192.945 What Methods Must an Operator Use to Measure Program Effectiveness?
2.6.15.1 CFR Language: 192.945(a)
98 2.6.15.2 ASME Standard Language
2.7 Appendix
2.7.1 CFR Reference: Item II, Appendix B to Part 192
2.7.1.1 CFR Language: Item II, Appendix B to Part 192
2.7.1.2 ASME Standard Reference:
99 3 49 CFR 193 – LIQUEFIED NATURAL GAS FACILITIES: FEDERAL SAFETY STANDARDS
3.1 Construction
3.1.1 CFR Reference: 193.2321 Nondestructive Tests
3.1.1.1 CFR Language: 193.2321(a)
3.1.1.2 ASME Standard Reference
100 4 49 CFR 195 – TRANSPORTATION OF HAZARDOUS LIQUIDS BY PIPELINE
4.1 General
4.1.1 CFR Reference: 195.5 Conversion to Service Subject to This Part
4.1.1.1 CFR Language: 195.5(a)(1)(i)
4.1.1.2 ASME Standard Reference
4.2 Design Requirements
4.2.1 CFR Reference: 195.118 Fittings
4.2.1.1 CFR Language: 195.118(a)
4.2.1.2 ASME Standard Reference
4.2.2 CFR Reference: 195.124 Closures
4.2.2.1 CFR Language: 195.124
4.2.2.2 ASME Standard Reference
101 4.3 Construction
4.3.1 CFR Reference: 195.222 Welders: Qualification of Welders
4.3.1.1 CFR Language: 195.222(a)
4.3.1.2 ASME Standard Reference
4.4 Pressure Testing
4.4.1 CFR Reference: 195.307 Pressure Testing Aboveground Breakout Tanks
4.4.1.1 CFR Language: 195.307(e)
4.4.1.2 ASME Standard Reference
4.5 Operation and Maintenance
4.5.1 CFR Reference: 195.406 Maximum Operating Pressure
4.5.1.1 CFR Language: 195.406(a)(1)(i)
4.5.1.2 ASME Standard Reference
102 4.5.2 CFR Reference: 195.452 Pipeline Integrity Management in High Consequence Areas
4.5.2.1 CFR Language: 195.452(h)(4)(i), 195.452(h)(4)(i)(B)
4.5.2.2 ASME Standard Reference
4.5.2.2.1 Limits and Disposition of Imperfections and Anomalies (B31.4 – 451.6.2)
4.5.2.2.1.1 Limits (B31.4 – 451.6.2.1)
4.5.2.2.1.2 Corrosion (B31.4 – 451.6.2.2)
103 4.5.2.3 CFR Language: 195.452(h)(4)(iii)(D)
104 4.5.2.4 ASME Standard Reference
105 Appendix A – Descriptions of Referenced ASME Standards

Related products

ASME PTB 9 2014
$26.65