ASTM-D3276 2021

$37.38

D3276-21 Standard Guide for Painting Inspectors (Metal Substrates)

Published By	Publication Date	Number of Pages
ASTM	2021

Guaranteed Safe Checkout

Category: ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM D3276-21

Active Standard: Standard Guide for Painting Inspectors (Metal Substrates)

ASTM D3276

Scope

1.1 This guide is intended as an information aid to painting inspectors in carrying out their task efficiently. It includes the key elements of surface preparation, coatings application, and final approval for both field and shop work. The items should be selected that are pertinent to the specification of a particular job.

Note 1: For additional helpful information, refer to the following documents: Manual of Coating Work for Light-Water Nuclear Power Plant Primary Containment and Other Safety-Related Facilities 2 New Concepts for Coating Protection of Steel Structures3 D16 Terminology for Paint, Related Coatings, Materials, and Applications4 D4538 Terminology Relating to Protective Coatings and Lining Work for Power Generation Facilities4 Steel Structures Painting Manual Vol 1 Good Painting Practice5 Steel Structures Painting Manual Vol 2 Systems and Specifications5 Manufacturers Specifications and Instructions (made available to the inspector for reference to special requirements for proper application) Safety Data Sheets (needed to ensure that personnel take necessary precautions in handling hazardous materials). Available from Materials manufacturer.

1.2 Certain industries or owners may require certified inspection personnel. See Guide D4537 for establishing procedures to certify inspectors for coatings work in nuclear facilities.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This guide is arranged in the following order:

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Keywords

coating application; coating inspection; industrial structures; metal substrates; painting;

ICS Code

ICS Number Code 87.020 (Paint coating processes)

DOI: 10.1520/D3276-21

Additional information

Coating Storage and Handling	6
Additional Considerations	9
Portable Pull-Off Adhesion Testers	10.1.3
Ventilation	9.1
Mixing of Coatings	6.2
Surface Profile	5.2.3
Film Defects	8.2.1
Steel Surfaces	5.4.1
General	10.1
Current-Type Gages	10.2.3.3
Inspection Checklist	Appendix X1
Initial Samples	6.3.1
Storage of Coating and Thinner	6.1
High Temperature	7.3
Holiday Detectors	10.2.4
Cleaning Procedures	5.3
Surface Preparation	5.1
Power Tool Cleaning	5.3.3
Comparison of Surface Preparation
Adhesion of Existing Coating	10.1.2
Aluminum Surfaces	5.4.3
Preparation for Inspection	4
Surface Profile Gages	10.1.1
Sampling of Thinned Coating	6.3.3
Hand Tool Cleaning	5.3.2
Thinning of Coating	6.3.2
Field Inspection Equipment	10.2
Thermometers	10.2.1.1
Thinning	6.3
Comparison of Water Jetting Standards	Table 2
Relative Humidity and Dew Point	10.2.1.2
Interchemical Gage	10.2.2.1
ASTM Standards	2.1
Dry-Film Thickness Gages	10.2.3
Factors Affecting Coating Performance	5.2
Brush Application	8.3
Commercial Grade Power Tool Cleaning	5.3.4.4
Pictorial Standard D2200	5.1.1
Spray Application	8.4
Moisture	7.4
Solvent Vapor Cleaning	5.3.1.1
International Standards Organization (ISO)	2.4
Specifications	Table 1
Wind	7.5
Drying and Curing Times	10.2.1
Residual Contaminants	8.1
Heating of Coating	6.4
Painted Surfaces	5.4.4
Inspection of Surfaces Prior to Field Painting	5.5
Coating System Failure	9.6
Quality Assurance	8.2
Precautions in Preparing Unpainted and Previously
Inspection Equipment	10
Pressurized Water Cleaning	5.3.6
Power Tool Cleaning to Bare Metal	5.3.4
Painting Schedule	9.3
Galvanized Surfaces	5.4.2
Destructive Thickness Gage	10.2.3.4
Rate of Application	8.7
Film Integrity	9.4
Drying	7.1
ASTM Adjuncts	2.6
Recoat Time	9.5
	Section
Roller Application	8.5
Wet-Film Thickness Gages	10.2.2
Mill Scale	5.2.2
Cleanliness	5.2.1
Nondestructive Film Thickness Gages	10.2.3.1
Coating Application	8
Maintenance Repainting	5.5.2
Surface Preparation Methods and Requirements	5
Low Temperature	7.2
Blast Cleaning	5.3.5
OSHA Standards	2.2
Weather Considerations	7
Shopcoat Repair	9.2
Sharp Edges	5.2.4
Magnetic-Type Gages	10.2.3.2
Steel Structures Painting Council Publications	2.3
Significance and Use	3
Miscellaneous Methods	8.6
Notched Gage	10.2.2.2
Chemical Cleaning	5.3.1
New Construction	5.5.1
Cleaning and Preparation of Various Surfaces	5.4
Referenced Documents	2

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-D3276 2021

ASTM D3276-21

Active Standard: Standard Guide for Painting Inspectors (Metal Substrates)

ASTM D3276

Related products