ASTM-D4868 2010
$35.75
D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 3 |
1.1 This test method covers the estimation of the gross and net heat of combustion in SI units, megajoules per kilogram, of petroleum fuels from the fuel density, sulfur, water, and ash content.
Note 1The equation for estimation of net and gross heat of combustion used in this method were originally published by the NIST Publication No. 97.
1.2 This test method is especially useful for estimating, using a minimum number of tests, the heat of combustion of burner and diesel fuels for which it is not usually critical to obtain very precise heat determinations.
Note 2More accurate estimation methods are available for aviation fuels (Test Methods D1405 , D4529 ,and D3338 ). However, those estimation methods require additional tests to those required in this test method.
1.3 This test method is purely empirical (Note 1). It is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil that conform to the requirements of specifications for petroleum fuels as described in Note 3. This test method is valid for those fuels in the density range from 750 to 1000 kg/m 3 and those that do not contain an unusually high aromatic content. High aromatic content fuels will not normally meet fuel specification criteria.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents |
| 2 | Summary of Test Method Significance and Use Procedure Calculation Report Precision and Bias |
| 3 | Keywords |
Related products
-
ASTM-D4898 2010
D4898-90(2010) Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis Published By…
-
ASTM-D4888 2020(Redline)
D4888-20 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes (Redline)…
-
ASTM-D4838 2010
D4838-88(2010) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints Published By…
-
ASTM-D4808 2017(Redline)
D4808-17 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and…
-
ASTM-D4864 2014
D4864-14 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas…
-
ASTM-D4886 2010
D4886-10 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) Published By…
-
ASTM-D4860 2014(Redline)
D4860-14 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear…
-
ASTM-D4863 2010(Redline)
D4863-10 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Redline) Published…
-
ASTM-D4568 2020
D4568-13(2020) Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin…
-
ASTM-D2868 2001
D2868-96(2001) Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather Published…
-
ASTM-D4865 2019(Redline)
D4865-19 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems (Redline)…
-
ASTM-D4863 2010
D4863-10 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants Published By…
-
ASTM-D4968 2019
D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics Published By…
-
ASTM-D2868 2010
D2868-10 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather Published…
-
ASTM-D4898 2010
D4898-90(2010)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis Published By…
-
ASTM-D4864 2013
D4864-90(2013) Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas…
-
ASTM-D4863 2013(Redline)
D4863-13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Redline) Published…
-
ASTM-D4860 2019
D4860-14(2019) Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear…
-
ASTM-D4968 2016(Redline)
D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics (Redline) Published…
-
ASTM-D4968 2015(Redline)
D4968-15 Standard Practice for Annual Review of Test Methods and Specifications for Plastics (Redline) Published…
-
ASTM-D7868 2013
D7868-13 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings Published By…
-
ASTM-D7868 2017
D7868-13(2017) Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings Published By…
-
ASTM-D4068 2017(Redline)
D4068-17 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane (Redline) Published By…
-
ASTM-D2868 2017
D2868-17 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet…
-
ASTM-D4848 2018
D4848-98(2018) Standard Terminology Related to Force, Deformation and Related Properties of Textiles Published By Publication…
-
ASTM-D4886 2010(Redline)
D4886-10 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) (Redline) Published…
-
ASTM-D4888 2015
D4888-06(2015) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes Published…
-
ASTM-D4868 2000
D4868-00 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner…
-
ASTM-D4068 2015(Redline)
D4068-15 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane (Redline) Published By…
-
ASTM-D2868 2010(Redline)
D2868-10 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather (Redline)…
-
ASTM-D868 2010
D868-10 Standard Practice for Determination of Degree of Bleeding of Traffic Paint Published By Publication…
-
ASTM-D2868 2015
D2868-10(2015) Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet…
-
ASTM-D4868 2017
D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon…
-
ASTM-D4968 2016
D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics Published By…
-
ASTM-D4863 2013
D4863-13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants Published By…
-
ASTM-D6868 2017(Redline)
D6868-17 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings…
-
ASTM-D6868 2017
D6868-17 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings…
-
ASTM-D4886 2018
D4886-18 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) Published By Publication…
-
ASTM-D868 2010(Redline)
D868-10 Standard Practice for Determination of Degree of Bleeding of Traffic Paint (Redline) Published By…
-
ASTM-D4868 2017(Redline)
D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon…
