ASME B5.9 1967 R2014
$98.04
ASME B5.9 Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes and Automatic Lathes – Reaffirmed: 2014
| Published By | Publication Date | Number of Pages |
| ASME | 1967 | 56 |
This Standard pertains to spindle noses for use on engine lathes, tool room lathes, turret lathes and automatic lathes and may be used advantageously on other machines wherever chucks or fixtures must be mounted accurately and rigidly on revolving spindles. Complete dimensions for each size and type of nose, as well as for mating backs of chucks, face plates and fixtures, are given in the tables. Also given are dimensions of gages for checking the important dimensions on these spindle noses and the backs of chucks, face plates and fixtures, to insure interchangeability between parts made by different manufacturers. 40S, and for sizes 10 and 12 of Schedule 80S are not the same as those of ANSI/ASME B36.10M. The suffix “S” in the Schedule Number is used to differentiate B36.19M pipe from B36.10M pipe. ANSI/ASME B36.10M includes other pipe thicknesses which are also commercially available with stainless steel material. meant to construe that such deviations from this Standard should not continue to be recognized. However, for general purposes applications, where the design, engineering, and manufacturing conditions permit some latitude, the use of diameters listed in the table are to be encouraged.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 3 | Foreword |
| 5 | Standards Commitee |
| 7 | Contents Tables |
| 9 | 1. Scope and Purpose 2. Nomenclature |
| 10 | 3. Gages and Gaging for Types A, B, and D, Spindle Noses |
| 11 | 4. Gages and Gaging for Type L Spindle Noses 5. Chucks |
| 12 | 6. Spindle Noses Recommedded for Different Types of Lathes 6.1 Bench Lathes 6.3 Tool Room Lathes 6.5 Engine Lathes 6.8 Turret Lathes 6.9 Single Spindle Automatic Lathes 6.10 Other Applications |
| 14 | Types A and B Spindle Noses Table 1 Types A and B Spindle Noses, Sizes 2, 3, and 4 In |
| 15 | Table 2 Types A and B Spindle Noses, Sizes 5 to 28 Incl |
| 16 | Table 3 Location of Holes and Driving Buttons in Types A and B Spindle Noses |
| 17 | Table 4 Backs of Chucks and Face Plates for Types A and B Spindle Noses |
| 18 | Table 5 Illustration of a Method for Balancing Type A Spindle Noses |
| 19 | Type D Spindle Noses Table 6 2 In. Type D1 Spindle Nose, Cam, Detent Screw, Detent Plunger, and Spring |
| 20 | Table 7 Backs of Chucks and Face Plates, Cam Lock Stud, and Stud Locking Screw for 2 In. Type D1 Spindle Nose |
| 21 | Table 8 3 In. Type D1 Spindle Nose, Detent Screw, Detent Plunger, and Spring |
| 22 | Table 9 Backs of Chucks and Face Plates, Cam Lock Stud, and Stud Locking Screw for 3 In. Type D1 Spindle |
| 23 | Table 10 4 In. Type D1 Spindle Nose, Cam, Detent Screw, Detent Plunger, and Spring |
| 24 | Table 11 Backs of Chucks and Face Plates, Cam Lock Stud, and Stud Locking Screw for 4 In. Type D1 Spindle Nose |
| 25 | Table 12 Type D1 Spindle Noses, Sizes 5 to 20 In. Incl., Cams, Cam Screws, and Camsprings |
| 26 | Table 13 Backs of Chucks and Face Plates, Cam Lock Studs, and Stud Locking Screws for Type D1 Spindle Noses, Sizes 5 to 20 |
| 27 | Table 14 Dimensions of Cam Lock Nuts, and Type B and Type D Studs |
| 28 | Table 15 Sleeves and Centers for Type D1 Spindle Noses for Engine Lathes and Tool Room Lathes |
| 29 | Table 16 Taper Holes, Counterbores for Same, and Through Holes in Type D1 Spindle Noses, Sizes 2 to 5 In. Incl., |
| 30 | Table 17 Taper Holes, Counterbores for Same, and Through Holes in Type D1 Spindle Noses, Sizes 6 to 11 In. Incl., |
| 31 | Table 18 Sections Through Type D1 Spindle Noses, Sizes 2 to 5 In. Incl., for Engine Lathes and Tool Room Lathes |
| 32 | Table 19 Sections Through Type Dl Spindle Noses, Sizes 6 to 11 In. Incl., for Engine Lathes and Tool Room Lathes |
| 33 | Table 20 Sections Through 6 In. Type D1 Spindle Nose, Assembled With Studs, Cams, Dog Plates, Sleeve, and Center |
| 34 | Gages for Types A, B, and D Spindle Noses Table 21 Master Gages for Face Plates 2 In. Types A, B, and D Spindle Noses, Chucks, and Face Plates |
| 35 | Table 22 Master Ring Gages for Types A, B, and D Spindle Noses, Sizes 3 to 28 In. Incl. |
| 36 | Table 23 Master Plug Gages for Chucks and Face Plates for Types A, B, and D Spindle Noses, Sizes 3 to 28 In. Incl. |
| 37 | Table 24 Working Gages for 2 In. Types A, B, and D Spindle Noses, Chucks and Face Pl |
| 38 | Table 25 Working Gages for 3 In. Types A, B, and D Spindle Noses, Chuck and Face Plates |
| 39 | Table 26 Outside Micrometer Working Gages for Types A, B, and D Spindle Noses, Sizes 4 to 28 In. Incl. |
| 40 | Table 27 Inside Micrometer Working Gages for Chucks and Face Plates for Types A, B, and D Spindle Noses, Sizes 4 to 28 In. |
| 41 | Type L Spindle Noses Table 28 Type L Spindle Noses, Drive Keys, and Retaining Screws |
| 42 | Table 29 Backs of Chucks and Face Plates for Type L Spindle Noses |
| 43 | Table 30 Draw Nuts for Type L Spindle Noses |
| 44 | Table 31 Sleeves and Centers for Type L Spindle Noses for Engine Lathes and Tool Room Lathes |
| 45 | Table 32 Taper Holes, Counterbores for Same, and Through Holes Spindles for Engine Lathes and Tool Room Lathes |
| 46 | Table 33 Sections Through Type L Spindle Noses for Engine Lathes and Tool Room Lathes, and Sleeves |
| 47 | Gages for Type L Spindle Noses Table 34 Taper Gages for Type L Spindle Noses, Chucks, and Face Plates |
| 48 | Table 35 Working Thread Plug Gages for Draw Nuts for Type L Spindle Noses. |
| 50 | Table 36 Setting Plugs for Thread Ring Gages for Chucks and Face Plates for Type L Spindle Noses |
| 52 | Table 37 Working Thread Ring Gages For Chucks and Face Plates for Type L Spindle Noses |
